Board Reference / Header Mappings / GPIO
ARTIK 05X Board Reference
The ARTIK 05X Starter Kit board has jumpers and connectors as shown. Refer to the ARTIK 05X Hardware User Guide for details on the connector signals.
- Arduino Reset (SW701): For Factory Reset feature.
ARTIK 05X Header Map
The Arduino shield and I/O break-out header signals are shown below. The signal levels and positions are Arduino-compatible for certain tested shields. Other shields may require adaptation. For example:
-
XGPIO pins used as outputs might require a pre-driver circuit to meet the drive strength requirements of some Arduino shields.
-
XGPIO pins used as inputs for 5V signals would need to be buffered as the ARTIK 05X pins are not 5V-tolerant.
The gpio mappings shown can be found in these files in the Tizen RT source code:
tinyara/os/arch/arm/src/artik053/src/artik053_boot.c
tinyara/os/arch/arm/src/s5j/chip/s5jt200_pinconfig.h
You'll be using these mappings in the Tutorials.
Arduino Shields
The ARTIK 05X Starter Kit has been tested using the Grove Base Shield.
The Grove sensor devices listed below have been tested using the interface noted.
| Description | Connection Type | Looks like this |
|---|---|---|
| Grove LED Socket Kit | Digital |  |
| Temperature Sensor | Analog |  |
| UV Sensor | Analog |  |
| Moisture Sensor | Analog |  |
| Light Sensor | Analog |  |
| Rotary Angle Sensor | Analog |  |
| Luminance Sensor | Analog |  |
| MPU9250 Accelerometer | I2C |  |